…for Flood/Water alarm!

The Cavius wall mounting base with probe is an accessory option for the flood alarm. For installation in basements with risk of flooding or areas with difficult accessibility. Just place the flood alarm base on the wall and the probe on the floor near the zink, washing machine, dishwasher etc.

Cavius wall mounting base with probe is an accessory option which can be used with Cavius flood alarm, for installation in basements with risk of flooding or areas with difficult accessibility. 

Mounting base is screwed on the wall by the enclosed screws, and the probe is placed on the floor. 

The operation is convenient and easy:
1. The base can be used with Cavius Flood alarms. 

2. Remove protective film from the base. 

3. Press the base with inserted flood alarm for about 10 seconds at a suitable place on the wall, and the probe on the floor.
Make sure that the probe reaches required level either to the ground or down the drain. 

4. Turn the alarm until it clicks all the way in and can’t be turned – then it is correct position. Suitable for vinyl wallpaper, polystyrene, non-stick and Silicon Coatings.

Download specifications:

Where to place your alarms?